We’re constantly working to make Corsano System better for you.
On this page, you’ll find a transparent look at the new features we’re developing, improvements in progress, and what’s coming next.
We believe in keeping you informed about our roadmap so you can see how your feedback shapes our priorities.
Have ideas or suggestions? We’d love to hear them, just use our feedback form!
| T | Summary | Due Date | Status |
|---|---|---|---|
 | REG_05: Casing material must be fire resistant | Done | |
| REG_04: Marking on device and Label/Package | Done | |
| REG_03: ESD protection | Done | |
| REG_02: Battery protected against temperature | Done | |
| REG_01: Battery is protected against over and under charge | Done | |
| REQ_HW_37: Charging of the Bracelet shall not be physically possible during wearing of the bracelet (BLE active, HCP is both aware of charge level, and charging status on the webportal) | Done | |
| REQ_HW_36: USB Charging cable must be dedicated custom designed magnetic connection | Done | |
| REQ_HW_35: bracelet isolation shall be to BF as per IEC 60601-1 | Done | |
| REQ_HW_34: AC Adapter shall be conform to IEC60601-1, dedicated & provided as part of the Corsano 287-2 System. | Done | |
| REQ_HW_33: Packaging must be sufficiently resilent to protect the bracelet during multiple shipping | Done | |
| REQ_HW_32: The IR LED power shall be less than 25mW/Sr at 20mA | Done | |
| REQ_HW_31: The device shall use low drift accelerometer sensor | Done | |
| REQ_HW_30: The device shall use low drift Temperature sensor | Done | |
| REQ_HW_29: The External Devices shall be medically certified or approved (FDA cleared, MDR, etc.) | Done | |
| REQ_HW_28: The Bracelet shall be compliant with EMC ISO 60601-2 requirements | Done | |
| REQ_HW_27: The device is sealed to avoid easy access to the electronics | Done | |
| REQ_HW_26: The device shall be able to operate as intended and safely at operating temperature | Done | |
| REQ_HW_25: Electrode circuits shall comprise series resistors to limit the current | Done | |
| REQ_HW_24: Case must be shock resistant | Done | |
| REQ_HW_23: Charging status must be available | Done | |
| REQ_HW_22: Charging cable must have a short-circuit protection | Done | |
| REQ_HW_20: Device must have ESD protection, 15kV air, 8kV contact | Done | |
| REQ_HW_19: Device must have non-volatile storage | Done | |
| REQ_HW_18: Device must use AFE | Done | |
| REQ_HW_17: Device must have an accelerometer | Done | |
| REQ_HW_16: PPG interface must follow Philips reference design with G, R, IR | Done | |
| REQ_HW_15: Battery must have max capacity | Done | |
| REQ_HW_14: The device must have 3 leds for display | Done | |
| REQ_HW_13: Casing material must be fire resistant | Done | |
| REQ_HW_12: Marking on device and Label/Package | Done | |
| REQ_HW_11: Battery protected against temperature | Done | |
| REQ_HW_10: Battery is protected aginst over and under charge | Done | |
| REQ_HW_09: Optical perfomance must be high to ensure good quality signals and medical grade measurements | Done | |
| REQ_HW_07: The device should be easy to recharge and fool proof | Done | |
| REQ_HW_06: The device must detect tap (by accelerometer) | Done | |
| REQ_HW_05: The device must have a closed enclosure, water resistant | Done | |
| REQ_HW_04: The system should be able to adjust precisely to the wrist to ensure good sensor position | Done | |
| REQ_HW_03: The materials fo the device that are in contact with the skin should not create any allergy | Done | |
| REQ_HW_02: The system should comfortable and be nice | Done | |
| REQ_HW_01: The system should be based on low weight and small size | Done | |
| USER_068: The app shall be able to run a third-party algorithm to monitor sleep | Done | |
| USER_067: The app shall enable spot measurements of health metrics during a defined duration with manual entry option for HCP mode | Done | |
| USER_066: The app shall collect raw sensor data (ACC, PPG, BIOZ, TEMP) and send it to the cloud with timestamps | Done | |
| USER_065: The Corsano app in HCP mode shall generate and manage local technical alarms for connectivity and data update issues | Done | |
| USER_064: The Corsano app in HCP mode shall display relevant health information and data update status | Done | |
| USER_063: The Corsano app in Patient mode shall display relevant health information, connectivity status, and bracelet battery level | Done | |
| USER_062: The mobile application shall handle metric and imperial unit systems for health data display | Done | |
| USER_061: The mobile application shall run on and be compatible with supported operating system versions (iOS 14.5+, Android 8+) | Done | |
| USER_060: The system shall be able to detect deviations from individual baseline values, allowing for a patient risk assessmentand early detection of clinical deterioration | Done | |
| USER_059: The Corsano System shall be able to detect cardiac arrest based on the analysis of PPG signal | Done |